Foldarap

This is a foldable 3D printer designed for travelling. It fits inside a small suitcase and is built using a

This is a foldable 3D printer designed for travelling. It fits inside a small suitcase and is built using a 20x20 T-Slot Aluminium Extrusion frame. It makes heavy use of Nema14 stepper motors.

More

Foldarap

Grid List

  1. Foldarap v1.1 Laser Cut Parts

    Foldarap v1.1 Laser Cut Parts

    3D Laser cut parts for FoldaRap 3D printer Learn

    7,26 €

  2. Foldarap v2.5 Laser Cut Parts

    Foldarap v2.5 Laser Cut Parts

    The folding RepRap 3D printer Learn

    3,85 €

  3. V-Slot 20x20 Extrusion

    V-Slot 20x20 Extrusion

    Anodized Aluminium V-Slot 20x20 profile, served in 1m pieces Learn

    13,21 €

  4. GT2 Pulleys

    GT2 Pulleys

    GT2 pulley made of alluminium, for belts of up 7mm wide Learn

    3,63 €

  5. Heater cartridge

    Heater cartridge

    Allows you to easily remove the heated nozzle from the extruder without disconnecting the wiring Learn

    2,20 €

  6. Silicone thermal pad

    Silicone thermal pad

    Keeps the building surface in its place and keeps an uniform heat transfer, avoiding hot or cold points and therefore improving the model adhesion Learn

    6,28 €

  7. Arduino MEGA 2560

    Arduino MEGA 2560

    Arduino is an open-source electronics platform based on easy-to-use hardware and software. It's intended for anyone making interactive projects. Learn

    14,99 €

  8. Metric Threaded Rod

    Metric Threaded Rod

    Threaded galvanised steel bar DIN 975 (1m) Learn

    1,22 €

  9. Pin crimping tool

    Pin crimping tool

    Pin Crimping tool for cables size Ø 0.1-1mm Learn

    19,60 €

  10. Thermistor with cable

    Thermistor with cable

    100KΩ Thermistor, ideal for 3D printers Learn

    1,90 €

  11. Extruder barrel with heatbreak

    Extruder barrel with heatbreak

    Nozzle throat M6 Learn

    2,40 €

  12. Matt Fixer Lacquer

    Matt Fixer Lacquer

    Keeps the ABS and PLA plastics glued to the heated bed with only 80°C and allows an easy detach when cooling. Learn

    4,51 €

  13. RAMPS 1.4

    RAMPS 1.4

    Reprap Arduino Mega Pololu Shield Learn

    9,20 €

  14. Nylon cable tie

    Nylon cable tie

    Nylon cable tie for general purpose available in various colors. Learn

    0,02 €

  15. Zip tie

    Zip tie

    Cable Ties perfect as wired fastening. Available in various colors Learn

    0,15 €

  16. Kapton Tape

    Kapton Tape

    Polyamide tape rolls Learn

    3,63 €

  17. Heatsinks

    Heatsinks

    Built in Aluminium, with adhesive layer Learn

    0,59 €

  18. Ceramic Screwdriver.

    Ceramic Screwdriver.

    Antistatic ceramic screwdriver. Learn

    1,95 €

  19. Fan duct

    Fan duct

    Fan duct used to hold the fan in the E3D J-Head extruders Learn

    3,22 €

  20. MK8 Complete Extruder

    MK8 Complete Extruder

    Includes fan, metal heatsink, 40W heater cartridge and 100K thermistor Learn

    38,12 €

  21. GT2 Timing Belts

    GT2 Timing Belts

    Reinforced rubber synchronous GT2 belt, 6mm wide, sold by meters Learn

    3,27 €

  22. Heat shrink tube

    Heat shrink tube

    PVC heat shrink tube Learn

    0,81 €

  23. Thermistor

    Thermistor

    100KΩ Thermistor, ideal for 3D printers Learn

    0,45 €

  24. Tube fitting

    Tube fitting

    Press tube fitting for bowden extruders Learn

    1,21 €

  25. NEMA 17 stepper motor - 48mm

    NEMA 17 stepper motor - 48mm

    High Torque NEMA 17 Hybrid Stepper Motor, 1.8° and 48mm Learn

    12,34 €

  26. Bipolar Driver A4988 2A

    Bipolar Driver A4988 2A

    Bipolar Stepper Motor Driver Learn

    2,99 €

  27. USB Cable A-B 40cm

    USB Cable A-B 40cm

    Isolated USB cable, 40cm length Learn

    1,00 €

  28. Heating Bed adjusting nut

    Heating Bed adjusting nut

    M3 nut for easy fixing and adjusting of the heated bed Learn

    0,62 €

  29. Blue Painter's Tape

    Blue Painter's Tape

    Perfect to get good surface adhesion when printing with PLA Learn

    16,94 €

  30. Bipolar Driver DRV8825 3A

    Bipolar Driver DRV8825 3A

    Bipolar Stepper Motor Driver Learn

    4,84 €

  31. Driver TMC2100 256 Microsteps

    Driver TMC2100 256 Microsteps

    Silent Driver Learn

    15,98 €

  32. Extruder barrel without heatbreak

    Extruder barrel without heatbreak

    Nozzle throat M6 Learn

    2,55 €

  33. Extruder Core

    Extruder Core

    Extruder Core for extruder Learn

    1,98 €

  34. BuildTak - Square

    BuildTak - Square

    BuildTak is a 3D printing surface for FDM 3D printers. It offers a superior alternative to using masking tape or heat resistant films (such as kapton) on your build plate. Learn

    15,15 €

  35. Smooth Rod Calibrated

    Smooth Rod Calibrated

    Solid 304 inox steel bars calibrated with H9 tolerance, taylormade cut Learn

    12,00 €

Grid List