About Thingibox
We are a group of computer and technology enthusiasts based in Barcelona. We design and redesign DIY projects that can be built with tools available everywhere.
Delta-robots are mostly known for its use in pick-and-place work in PCB fabrication and generic packaging...
Delta-robots are mostly known for its use in pick-and-place work in PCB fabrication and generic packaging applications. They feature fast and accurate positioning and are relatively easy to build, allowing to print taller objects.
MoreDelta
€ 26.63
€ 15.00
€ 1.95
€ 2.42
€ 1.99
€ 3.22
€ 1.82
€ 1.82
€ 0.09
€ 0.26
€ 1.58
€ 0.61
€ 0.59
€ 3.63
€ 9.40
€ 0.67
€ 5.51
€ 38.12
€ 0.03
€ 26.63
€ 0.46
€ 7.51
€ 7.79
€ 2.79
€ 0.46
€ 1.91
€ 1.21
€ 1.00
€ 12.00
€ 0.16
-
Aluminium Round heated bed
PCB heated bed for 3D printers Learn€ 26.63
-
Arduino MEGA 2560
Arduino is an open-source electronics platform based on easy-to-use hardware and software. It's intended for anyone making interactive projects. Learn€ 15.00
-
Ceramic Screwdriver.
Antistatic ceramic screwdriver. Learn€ 1.95
-
Drive gear wheel for stepper motor
Stainless steel drive gear wheel for stepper motor Learn€ 1.21
-
Endstop switch with cable
Small limit switch, designed to be soldered onto a circuit board Learn€ 2.42
-
Extruder barrel with heatbreak
Nozzle throat M6 Learn€ 2.40
-
Extruder barrel without heatbreak
Nozzle throat M6 Learn€ 2.55
-
Extruder Core
Extruder Core for extruder Learn€ 1.99
-
€ 3.22
-
GT2 Pulleys
GT2 pulley made of aluminium, for belts of up 7mm wide Learn€ 1.82
-
GT2 pulleys without fixing screw
GT2 pulley made of aluminium, for belts of up 7mm wide Learn€ 1.46
-
GT2 Timing Belts
Reinforced rubber synchronous GT2 belt, 6mm wide, sold by meters Learn€ 1.82
-
Heat shrink tube
PVC heat shrink tube Learn€ 0.09
-
Heated Bed Clip
Binder clip for attaching the glass plate to the heating bed Learn€ 0.26
-
Heater cartridge
Allows you to easily remove the heated nozzle from the extruder without disconnecting the wiring Learn€ 1.58
-
Heating Bed adjusting nut
M3 nut for easy fixing and adjusting of the heated bed Learn€ 0.61
-
€ 0.59
-
Kapton Tape
Polyamide tape rolls Learn€ 3.63
-
Kossel hanging station
Fisheye Learn€ 9.40
-
LCD 12864 Full Graphic Screen Controller for RAMPS
RAMPS controller with 128x64 dot matrix LCD screen. Includes SD card reader to print designs without the need of a PC. Learn€ 18.77
-
LCD 2004 Screen Controller for RAMPS
RAMPS controller with 20x4 LCD screen. Includes SD card reader to load designs without the need of a PC. Learn€ 13.92
-
LM Lineal bearings
Lineal bearings for smooth rods Learn€ 0.67
-
Matt Fixer Lacquer PRO
Keeps the ABS and PLA plastics glued to the heated bed with only 80°C and allows an easy detach when cooling. Learn€ 5.51
-
MK8 Complete Extruder
Includes fan, metal heatsink, 40W heater cartridge and 100K thermistor Learn€ 38.12
-
Nylon cable tie
Nylon cable tie for general purpose available in various colors. Learn€ 0.03
-
Power Source 12V 30A
Switching power supply Learn€ 26.63
-
€ 0.46
-
€ 7.51
-
€ 7.79
-
Smooth Rod Calibrated
Solid 304 inox steel bars calibrated with H9 tolerance, taylormade cut Learn€ 2.79
-
Thermistor
100KΩ Thermistor, ideal for 3D printers Learn€ 0.46
-
Thermistor with cable
100KΩ Thermistor, ideal for 3D printers Learn€ 1.91
-
Tube fitting
Press tube fitting for bowden extruders Learn€ 1.21
-
USB Cable A-B 40cm
Isolated USB cable, 40cm length Learn€ 1.00
-
V-Slot 20x20 Extrusion
Anodized Aluminium V-Slot 20x20 profile, served in 1m pieces Learn€ 12.00
-
€ 0.16
Follow us