ION v5 Direct extruder

€56.73
5 1
,
5/ 5
Tax included
Built in transparent acrylic 5mm
Type
Quantity
Out-of-Stock

 

Tax included

 

Worldwide shipping

 

European warehouse

Units Material
1 Extruder Acrylic Parts
1 Motor Nema 17
2 Bolt M3 16mm Slot
4 Bolt M3 10mm Slot
7 Bolt M3 12mm Slot
7 Bolt M3 20mm Slot
3 Bolt M3 40mm Allen
1 Bolt M4 20mm Slot
2 Bolt M4 55mm Allen
15 Nut M3 HEX
2 Nut M4 HEX
1 Nut M4 Self-Blocking
1 Nut M5 Self-Blocking
3 Acrylic spacer M3 5mm
3 Acrylic spacer M4 5mm
13 Washer M3
2 Washer M4
2 Washer M5
1 Bolt M5 60mm HEX
1 MK8 Drive gear wheel
1 Small Gear for Nema 17
1 Tube PTFE ( Ø 2/4mm - 100mm) - only for 1.75mm
1 Fan duct v5
2 LM8LUU Linear Bearing
2 Spring M4 12mm
1 624ZZ Axial Bearing
2 625ZZ Axial Bearing
1 Axial Fan 12V 30mm
1 Extruder E3D v5 1.75mm/3mm
This extruder can be used in any printer with an x-axis built with 8mm smooth bars with 45mm of separation between centers. Most Prusa standard printers have this separation.

This kit includes the extruder and the carriage. Both are cut by laser in transparent acrylic extrusion (great precision) sheet with 5mm thickness.

It sells disassembled.

See the assembly guide

This extruder has a reduction mechanism that transmits to the filament a force five times greater than that provided by a motor directly. Therefore we have reduced the size of the motor and also the weight of the entire extruder.

It also has a tongue that serves to easily mount or unmount the extruder body from the carriage assembly, making it possible to have multiple uses.

In the upper part of the extruder there are several holes to install the cable chain.

It has two supports to put both the inductive sensor or the capacitive sensor (the sensor is sold separately).

It is very easy to change the E3D v5 extruder from 1.75mm to a 3mm extruder. A small clamp allows you to remove the metal part and change it in seconds.

It also has a filament guide that snaps into place between the extruder walls. This guide is calibrated so that the filament passes through it, so that an increase in the width of the filament will cause a jam in the guide before causing it inside the metal body.

We also recommend to buy the following products:

• 1 x Inductive sensor or capacitive
• 1 x Cable chain
1159
Comments (0)
No customer reviews for the moment.