Anti warping ABS Filament 1.75mm
Formulated in Europe following our specs
|Tolerance||± 0,05 mm|
|Printing temperature||240ºC - 260ºC|
|Heat bed temperature||± 80ºC-90ºC|
|Recommended printing speed||50-90 mm/s|
|Max. elongation at break||34%|
Our ABS anti warping filament has been specially designed to reduce warping, allowing to print larger objects while keeping the excellent properties of ABS plastic.
This extremely hard and impact resistant thermoplastic filament is ideal for technical use as well as for high yield pieces.
Also features an excellent interlayer adhesion as well as a reliable bed adhesion, wether printing on glass, tape or other adhesives.
The properties of ABS makes it ideal for pieces that need post-processing such as sanding, drilling, etc. It is also soluble in acetone. Separate pieces can be glued together with acetone, and their surface can be also treated providing a shiny finishing.
In order to improve the adherence to the build platform we recommend to use a heated bed with a temperature of aprox. 100ºC. We advise to treat the printing surface with fixer lacquer or Kapton tape, or to use a BuildTak sheet. If this is not sufficient, you can use the brim function in the laminating program.
For a perfect layer adherence it is important to keep room temperature constant, and neutralize air currents.
No customer reviews for the moment.