| Driver || TMC2100 |
| Steppings || Up to 1/256 |
| Output voltage || From 4,75 a 46 V |
| Output current || Up to 2A (1,2A/phase) |
| Compatible with NEMA || 14, 17 |
| Working voltage || From 3,3 to 5 V |
| Pinout separation || 2,54mm |
The TMC2100 step-by-step controller operates extremely quietly, both at standstill and at low speeds.
Is compatible with our Nema 17
, Nema 14
and with almost all boards (RAMPS
, Sanguinololu, etc...)
This product is able to offer extra speed for 3D printers, office automation and robotics. The TMC2100 is TRINAMICs
most autonomous driver IC
. This small and intelligent standalone driver for two phase stepper motor offers market-leading features. CPU interaction is not required. Ensures noiseless operation combined with efficiency and best motor torque. Integrated power MOSFETs handle motor currents up to 1.2A RMS
continuously per coil. For saving energy, the TMC2100 provides standstill current reduction. Protection and diagnostic features support robust and reliable operation. The TMC2100 enables miniaturized designs with low external component count for cost-effective and highly competitive solutions.
The output power can be adjusted using the small potentiometer soldered to the board. In order to adjust the power of the potentiometer we recommend to buy a ceramic screwdriver
It is not recommended to modify the wiring of this (and other) electronic component while it is powered. For the use over long periods with currents close to the nominal value, we recommend to employ a heat sink
with every driver.